SL-V Series High-output Injector from LINCOLN
SL-V AND SL-V XL Injectors
Features
All of the features and benefits of the standard SL-V plus the ability to mount in the same manifolds as the SL-V and SL-1 injectors.
Two SL-V XL injectors provide 22% more outpout than one SL-11.
One SL-V XL can replace more than three standard output injectors.
Longer life for trouble -free performance.
Visual Bypass Indicator
The visual bypass indicator alerts mainternance personnel when an internal seal is failing and needs replacements, saving costs and expensive downtime.
Clear Polycarbonate Protective Cap
The water-tight,clear polycarbonate cap on the SL-V XL injector is O-ring sealed, UV resistant,and keeps abrasive dirt and dust away from the cycle pin indicator while allowing a fast confirmation of injector performance.
Use Thicker Lubricants
Higher visosity lubricants are almost always preferred for lubrication systems, Thicker greases stay in bearings longer and provide better protection against bebris and washout. The SL-V XL has a 6,000PSI pressure capability and vents at 1,000 PSI allowing higher viscosity lubricants to be used.
Run Longer Supply Lines
The longer the supply line,the longer it takes the supply line pressure to vents, whick potentially increases the minimum time between lube events. The SL-V's superior venting capability performs as well as dual-line systems with reduced plumbing cost.
100% compatibility with the SL-1 and SL-V injectors
All SL-V,SL-V XL and SL-1 injectors can be mounted in the same manifold. This means substantial cost and time savings because special mounting hardward ( clamps, brackets,and fittings) add additional plumbing labor are no longer needed for large lubrication applications.
